|
|
 |
PARTS ONLY
FOR ALL PRODUCTS
THIS LIMITED WARRANTY COVERS THE FOLLOWING PARTS ONLY:
Engine long block assembly, including all internal lubricated
parts, i.e. Rings, pistons, pins, crankshaft and, main bearings,
the connecting rods, and rod bearings, camshaft bearings, timing
chain gears, rocker arms, valve springs, valve guides, valve
seats, valve push rods, valve lifters, and oil pump.
Additionally, the engine head(s), engine block and cylinder
barrels will be covered if they are solely as a result of the
mechanical failure of one or more of the internal lubricated
components specified above. The Cooling system must be in good
working order including cooling fans.
Accessory items, including but not limited to electrical
components of all types (distributor, alternator and all sensors
and electrical control devices), fuel systems, gaskets, seals,
filters, mounts linkage and fluids are not covered by this
agreement.
TRANSFER CASE: All internal lubricated parts contained within
the transfer case. The transfer case itself will be covered if
damage solely as a result of the mechanical failure of one or
more of the internal lubricated components contained within the
transfer case.
Accessory items, including but not limited to, U-joints,
electrical components, linkage, seals, gaskets, mounts or fluids
are not covered by this Agreement.
DIFFERENTIAL: All internal lubricated parts contained within the
drive axle housing case. The drive axle housing itself if
damaged solely as a result of the mechanical failure of one or
more or the internal lubricated components contained the drive
axle housing.
Accessory items, including but not limited to, backing plates,
all brake system components, cables, controls, linkage, vents,
pumps, U-joints, electrical controls, mounts, seals, gaskets,
and fluids are not covered by this Agreement.
TRANSMISSION (Automatic or Standard): All internal lubricated
parts contained within the transmission case. The transmission
case itself if damaged solely as a result of mechanical failure
of one or more of the internal lubricated components contained
within the transmission case. The Complete hydraulic system must
be flushed including integral transfer case, oil cooler, lines,
and new filter(s) installed.
Accessory items, including but not limited to, modulators,
governors, electrical controls, linkage, mounts, seals, gaskets,
and fluids are not covered by this agreement.
COVERAGE AND LIMITATIONS: You must have a professional mechanic
(any small engine repair shop, motorcycle shop, or local auto
repair shop) or an authorized TANK Dealer assemble your new
motorized vehicle and do the prep work to assure your vehicle is
in good working condition. You will need to provide proof of
this when filing a warranty claim, so keep your receipts.
Subject to the limitations stated in this agreement, TANK agrees
(at its sole discretion and election) to replace a covered
component if the covered component fails as a result of one or
more of the internal lubricated parts within the component
stated warranty period from the date of purchase, while the
component is being used under the conditions and in the manner
specified by its original manufacturer.
The following items are not covered under any circumstance.
Tires, rims, body panels, fuses, forks, shocks, gaskets, light
bulbs, seats, CV Boots, oil filter, air filter, fuel filter,
filters, clutch wear parts, cables, drive belt, chain, spark
plug, any part made from rubber, belts, brake linings and/or
pads, batteries, sprockets, external springs, clips, nuts,
bolts, fasteners, frame.
Initial Preperation and delivery issues (DEALER ONLY): Items not
covered by the warranty above may be covered under the initial
set up of the vehicle if reported to TANK by the dealer.
Contact your sales rep for details.
THIS AGREEMENT AND LIMITED WARRANTY IS VOID IF ANY OF THE
FOLLOWING IS TRUE:
• THE CUSTOMER DOES NOT USE A PROFESSIONAL MECHANIC (SMALL
ENGINE REPAIR SHOP, MOTORCYCLE SHOP, OR AUTO REPAIR SHOP) OR AN
AUTHORIZED TANK DEALER TO ASSEMBLE AND PREP THE PRODUCT PRIOR TO
OPERATION. Proof of this is required for warranty claims.
• THE DAMAGE TO THE COMPONENT IS CAUSED BY AN ACCIDENT.
• THE CUSTOMER FAILS TO FOLLOW THE MINIMUM MAINTENANCE AND
BREAK-IN REQUIREMENTS SUGGESTED BY THE MANUFACTURER AND FAILS TO
PROVIDE PROPER SERVICE DOCUMENTS.
• THE DAMAGE TO THE PRODUCT IS CAUSED DURING SHIPPING.
• PRODUCT IS USED IN A MANNER WHICH IT WAS NOT DESIGNED FOR.
• THE PRODUCT IS MODIFIED IN ANYWAY.
• THE PRODUCT IS USED IN RENTAL OR COMMERCIAL BUSINESS.
TOWING CHARGES: All towing and/or shipping charges incurred are
the responsibility of the customer.
REPAIRED COMPONENTS: If the components are repaired under the
terms of this agreement, they will be repaired or replaced with
component parts of like kind and quality.
LABOR TO REPAIR OR REPLACE PARTS: TANK does not pay or reimburse
any labor cost under any circumstances.
S&H Charges and WHO pays:
IN WARRANTY: If your product is still under warranty you may
return any part for exchange, at your expense, to our El Monte
California Distribution center. We will pay return shipping to
you unless it is determined your part was abused or damaged
other than manufacturers defect. Your dealer may handle the
parts exhange for you at no expense to you however the option to
do so is that of the dealers and we have no control of a dealers
in house parts exhange policies.
Out of warranty: Customer is to pay for parts, S&H both ways and
all labor charges.
In all cases you must send us the part that needs to be
replaced. Failure to do so may result in your getting the wrong
part. We are not responsible for wrong parts sent if we do not
have your part to exchange and verify correct part numbers.
SHIPPING POLICY: The following is our shipping policy in
general. See above for specifics of in/out of warranty shipping.
• All shipping related fees must be prepaid in full. Unless the
customer is using Freight collect or has arranged his/her own
freight.
• TANK can not guarantee delivery schedule.
• TANK is not responsible for shipping delays.
• TANK is not responsible for damages occurred during shipping.
• TANK is not responsible for any extra cost incurred by the
customer after the part has been shipped.
• TANK is not responsible for return shipping costs and these
costs must be included with the initial part order if not in
warranty. If shipping funds are not included the part will not
be shipped.
• TANK is not responsible for any cancellation incurred cost.
All incurred costs due to cancellation must be paid in full and
is not refundable. (Example: If product or part has left the
warehouse and the order is cancelled the shipping company will
charge freight, whenever the product leaves our warehouse.)
Why do you need my part? We may need your part for several
reasons.
We need to verify your replacement part is the correct one to
send to you.
We require the part back so we may monitor defective parts and
notify the correct manufacturer or potential future problems or
recalls.
We need to verify that your part is in fact defective. Many
times we receive parts that are not defective at all.
Items under warranty must send parts back to get free excahnges.
LIMITED WARRANTY TRANSFERABILITY:
THIS WARRANTY IS NOT TRANSFERABLE.
NO IMPLIED WARRANTIES OR AGREEMENTS:
THERE ARE NO AGREEMENTS OR WARRANTIES, EXPRESSED OR IMPLIED
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, OTHER THAN THOSE STATED IN THIS AGREEMENT.
TANK SHALL NOT BE RESPONSIBLE FOR THE PAYMENT OF DAMAGES, OTHER
THAN THE SUMS SPECIFIED IN THIS AGREEMENT AND LIMITED WARRANTY,
FOR INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGE ARISING FROM
INJURY, LOSS OF USE, LOSS OF TIME, RENTAL VEHICLES, PROFITS, OR
INCOME TO THE CUSTOMER AS A RESULT OF A FAILURE OF ANY COMPONENT
OR PART.
NO OTHER AGREEMENT: There are no other agreements between the
parties with regards to the components purchased except as
stated in this agreement & limited warranty.
REPLACEMENT PART: TANK reserves the right to inspect the
defective part before replacing it. In some cases TANK will
require customer to send in the defective part for inspection
before exchange can be made. The inspection process might take
from 2-4 business days after its arrival to the designated
inspection office. TANK will decide if the part in question is
defective or otherwise. TANK does not reimburse shipping fee.
It is the responsibility of the buyer, dealer and distributor
and/or end user, and not TANK, to ascertain, and obey, all
applicable local, state, federal and international laws in
regard to the possession, and use, of any item purchased from
TANK. All equipment is sold subject to public law and any local,
state or federal ordinances or international law. Dealers and
end users must consult their local, state & country laws before
ordering or purchasing products made or distributed by TANK.
Dealer/Distributor agrees that absolutely no sales of any of our
motorized products will be to minors. By placing an order, the
buyer represents that the products ordered will be used in a
lawful manner and that he/she is of legal age. TANK will not be
held liable for the misuse of any product purchased from us or
any of our distributors & dealers.
Purchaser hereby certifies that He/She is over 18 years of age.
Purchaser has carefully read the foregoing and acknowledges that
purchaser understands and agrees to all of the above terms and
conditions. Purchaser has had the opportunity to ask any and all
questions regarding this agreement and the effect of the same.
Purchaser is aware that by ordering and sending payments for any
item(s), purchaser assumes all risks and waives and releases
certain substantial rights that purchaser may have or posses.
Purchaser there for releases all liability and waives any and
all rights purchaser may have in regards to purchases made of
product directly or indirectly from TANK.
This Agreement shall be effective and binding upon my heirs,
agents, personal representatives and assigns.
|
|
|
|
 |
|
|
